Fixture Services We Handle
- Toilet repair — running toilets, weak or incomplete flush, fill valve and flapper replacement
- Toilet installation and replacement
- Kitchen and bathroom faucet repair and replacement
- Sink installation, including drain assembly and P-trap work
- Garbage disposal repair and replacement
- Shutoff valve and supply line replacement
- Wax ring and flange repair for a toilet that rocks or leaks at the base
Signs You Need Toilet Repair
- A toilet that runs continuously or intermittently between flushes, wasting water even when nobody's used it
- Water pooling or staining on the floor around the base of the toilet
- A weak flush that takes two or three tries to clear the bowl
- The tank refilling slowly or never quite reaching the fill line
- A toilet that rocks slightly when you sit down — usually a sign the wax ring or flange has failed
Signs You Need Faucet or Sink Repair
- A faucet that drips steadily even when fully shut off, usually a worn washer or a damaged seal
- Water pooling around the base of the faucet or under the sink cabinet
- Low water pressure at one fixture while the rest of the house is normal
- A sink that drains slowly, gurgles, or backs up
- Corrosion or mineral buildup visible around the spout or handles
Garbage Disposal Trouble
A disposal that hums but won't spin, jams repeatedly, or leaks from the bottom is usually past the point where the reset button fixes it. Grinding, rattling, or a burning smell during operation are signs the motor or blades are wearing out. Most disposals last eight to twelve years — if yours is older than that and needs a second repair, replacement is usually the better move.
Repair or Replace?
For toilets, a leaky flapper or a worn fill valve is almost always a straightforward repair, even on an older unit. A toilet with a cracked tank or bowl, or one that's needed several repairs in the past year, is worth replacing outright — patching a cracked fixture just delays a bigger leak. For faucets, worn washers, O-rings, or cartridges are a normal repair regardless of the faucet's age; a faucet that's corroded through the body or built around parts that aren't made anymore is usually easier to replace than to keep chasing. Garbage disposals are simpler math — a few years old and it's a repair; past ten years and failing, replace it.
Faucet and Sink Types We Service
Kitchen faucets — single-handle, pull-down, pull-out, and two-handle setups — and bathroom faucets in centerset, widespread, and single-hole configurations all use different internal parts, so knowing the type helps us bring the right stock to the first visit. We also work on bar and prep sink faucets, utility sink faucets, and the sinks themselves: undermount, drop-in, pedestal, and vanity-mounted, along with the P-traps and shutoff valves underneath them.
Hard Water and Your Fixtures
Hard water across the Treasure Valley speeds up mineral buildup on faucet aerators, cartridges, and valve seats, and it's a common reason a fixture that's only a few years old is already dripping or losing pressure. Toilet fill valves are just as susceptible — scale buildup inside the valve is a frequent cause of a toilet that runs or refills unevenly. If scale is a recurring problem across your fixtures, our water softener and filtration team can cut down how often you're replacing parts.
What to Expect During a Repair Visit
A technician examines the fixture, explains what's worn or failed in plain terms, and walks you through the repair or replacement options before starting. Most single-fixture repairs are diagnosed and fixed in the same visit. If a full toilet or faucet replacement makes more sense, we'll say so and give you options rather than defaulting to the most expensive fix.
Treasure Valley Fixture Repair
We handle toilet, faucet, sink, and garbage disposal calls across Caldwell, Boise, Meridian, Nampa, and the rest of the Treasure Valley from our shop on Commercial Way in Caldwell. Call (208) 366-5771 and a real person answers — no phone tree, no call center. Family-owned, veteran-owned, and Treasure Valley-based since day one, with same-day service when you call early.
Frequently asked questions
How can I tell if I have a leaky toilet?
A leaky toilet often shows up as a running toilet with continuous water flow, water accumulation or staining on the floor around the base, or a water level in the tank that keeps dropping even when it hasn't been flushed. Addressing these signs early helps you avoid water damage and a higher water bill.
What causes a clogged toilet?
Most clogs come from items that don't break down easily — paper towels, wipes, feminine hygiene products, or excessive toilet paper — or from an object that's fallen in by accident. A plunger clears many simple clogs, but a blockage that keeps coming back usually means something's caught further down the line and needs a professional look.
What are the signs of a leaky faucet?
Dripping from the spout even when the handle's fully off, moisture building up around the base of the fixture, or water pooling in the sink are the usual signs. Most leaks trace back to a worn washer or a damaged seal inside the faucet, and catching it early keeps a small fix from turning into a bigger one.
Should I repair or replace my toilet?
If the toilet is relatively new and the problem is minor — a worn flapper or a faulty fill valve — repair is almost always the right call. A toilet with a cracked tank or bowl, or one that's needed several repairs in the past year, is usually better replaced outright rather than patched again.
How much do toilet or faucet repairs cost?
It depends on what's actually wrong — a flapper or fill valve swap is a quick, inexpensive fix, while a full toilet replacement or a faucet that needs rebuilding costs more. We diagnose the issue first and give you an exact price in writing before any work starts, so you're never guessing at the cost.
How long does a typical toilet or faucet repair take?
Most single-fixture repairs — a flapper, a fill valve, a faucet cartridge — take well under an hour once the technician has diagnosed the problem. A full toilet or faucet replacement takes a bit longer since it includes removing the old fixture and sealing in the new one properly.
Why does my faucet keep dripping after I already replaced the washer?
If a new washer doesn't stop the drip, the valve seat it presses against is likely worn or corroded, which is common in older faucets and in homes with hard water. At that point, resurfacing the seat or replacing the cartridge usually solves it for good.
